By:
On:
In: Musings
With: 2 Comments

Developing your film at home is both rewarding and frustrating at the same time and to add on an extra layer of complexity there is a lot of developers out there that you can use, especially in the black & white field. While certainly not as much as there used to be, there is still an excellent selection of developers to suit almost every person’s need, without having to dive deep into building your developers from base chemicals. Ultimately every photographer has a different taste but if you’re starting out with home development the choices may seem a little overwhelming so I’ll be breaking downRead More →

By:
On:
In: Developer Review Blogs
With: 3 Comments

I have far surpassed one hundred and fifty camera reviews and one hundred film reviews, my other two reviews being lenses and developers have only made it to the big fifty this year. If you read my previous post on lens reviews these are my least favourite. And while I rather enjoy creating film and camera reviews the most, developer reviews come in as the third favourite. The reason being is that I have the most amount of freedom connected to their creation. And while I’m working on a full post on how I write developer reviews, this post is about looking back at theRead More →

By:
On:
In: Developer Review Blogs
With: 1 Comment

I first discovered a package of Kodak Microdol-X in the back of an old camera shop in Pittsburg, PA. Microdol-X was Kodak’s original fine-grain developer before being supplanted by Kodak Xtol. Although both But Microdol-X was much loved by those who used it and I’ll admit, it’s an excellent developer. Thankfully as a powder developer even those old pouches have a long shelf life, but the supply is limited. Thankfully the fine folks at LegacyPro have an answer, Mic-X, a complete clone of the original Microdol-X that uses all the original times and dilutions. Technical Details Manufacturer: LegacyPro Name: Mic-X Primary Developer: Metol Type: Reusable/One-ShotRead More →

By:
On:
In: Photography
With: 0 Comments

It’s been a minute since I ran a Toronto Film Shooters Meetup, let alone getting one outside the city. My good friends Bill and John have been killing it with the meetups, especially those inside Toronto. I love getting the group out beyond the GTA. While Hamilton is close, the TFS group has representation across North America. I also love exploring Hamilton with its stunning heritage architecture, so I organised a walk through Jamesville and into the historic downtown core at the start of June. For the walk, I went with a couple of cameras; first up is my beautiful Minolta Dynax 600si with theRead More →

By:
On:
In: Developer Review Blogs
With: 0 Comments

There’s always another developer out there to try out, and every time I start to wonder when I’ll need to wind down these reviews, another one pops up. In the case of Fotospeed FD10, I saw it on an Instagram story from a fellow film photographer and started to hunt it down. There are two versions of FD10 out there, Fotospeed and Berspeed; I’m not sure which company made the developer originally or what the developer was made for. But from what I’ve seen online, this is an excellent general-purpose developer for small-scale to large-volume processing. Technical Details Manufacturer: Fotospeed Name: Film Developer FD10 PrimaryRead More →

By:
On:
In: Camera Review Blogs
With: 0 Comments

When it comes to the world of TLRs, I was hooked from the first time I picked one up; in my case, the LOMO Lubitel 2. But the Lubitel was primitive even for the age when it was produced as a simple camera aimed at budding photographers. And while there is a certain character to the images produced by that T-43 lens, I had hit the gear acquisition hard after listening to the Film Photograph Podcast. Thankfully in those days, the cost of cameras had not yet risen, and you could get excellent deals on almost anything. At a local camera show put on byRead More →

By:
On:
In: Optical Review Blogs
With: 0 Comments

When I first started into the Minolta Maxxum system, my first two lenses were zooms, the iconic duo of f/4 classics, the 35-70mm and 70-210mm. A trip to Burlington Camera yielded a couple of prime lenses that would be perfect additions to my kit; they were the classic 50mm f/1.7 and the lens I’m reviewing today the 28mm f/2.8. The Maxxum 28/2.8 is a great lens and a perfect fit. Doesn’t take too much space. It is close to the same size as the 50 and even the 35-70 and is my favourite prime lens for my Maxxum 9 system without a 35mm prime. AndRead More →

By:
On:
In: Photography
With: 1 Comment

It has been far too long since I got together with this amazing group of people in-person since all of this started in March 2020. And while I was unable to make it out to the first meetup since our last meetup in February 2020 (at least it was the largest meetup to date). And through early 2021 there were some attempts at virtual meetups, the fact of the matter is that the TFS group is best served with in-person meetings. Thankfully with things looking far better real meetups kicked off in October with a second meetup taking place at the beginning of the month.Read More →

By:
On:
In: Optical Review Blogs
With: 1 Comment

It is always a good idea to future proof your lenses, especially when working with the Minolta manual focus cameras. I say that because, like Nikon, while the original 1958 SR-Mount is basically the same as 1977 SR-Mount, there are subtle differences, like the Nikon F-Mount. I first picked up this lens as part of a drive to get better glass for my Minolta X-7a, my second Minolta SLR. While I could go with MC variant lenses, I went with the MD variant. The reason being that if I had updated my X-7a to an X-700, I needed lenses that would work with all theRead More →

By:
On:
In: Developer Review Blogs
With: 0 Comments

I need to start learning that when it comes to black and white developers, all of this has happened before, all of this will happen again. Take, for example, Rollei Low-Speed, RLS is a modern rebranding of LP-CUBE XS. There’s very little information about both developers online outside of official documentation. But it also has some interesting notes and is the first time using a film described as a deep layer developer. But the one thing I am familiar with is a developer that works best at speed less than the box. In fact, the amount of reduction in film speed is what I sawRead More →